Beschreibung
FOXBC 12 Zoll Aluminium-Gehrungssägeblatt 96 Zähne TCG für NE-Metalle & Kunststoffe mit 1-Zoll-Aufnahme
- 12 Zoll Aluminium-Sägeblatt zum Metallschneiden, 96 Zähne TCG, Schnittbreite 0,094 Zoll, Hakenwinkel -5°, 1 Zoll Aufnahme
- FOXBC 12 Zoll Aluminium-Sägeblätter zum Schneiden von dünnen (bis zu 3,2 mm), mittleren (2,4 mm–6,4 mm) und dicken (4,8 mm–11,1 mm) Aluminiummetallen.
- Lasergeschnittene Stabilisator-Lüftungsschlitze zur Geräuschdämpfung und Vibrationsreduzierung für Präzision und Langlebigkeit
- Hergestellt aus hochdichtem FoxCarbide Hartmetall für extreme Schnittstandzeit, widerstandsfähig gegen Stöße, reduziert Verschleiß, ermöglicht verstopfungsfreie Schnitte und hält länger als Standard-Hartmetall bei Metallschneideanwendungen.
- Dreifach-Spanwinkel (TCG) Zahngeometrie für maximale Lebensdauer, Geschwindigkeit und Haltbarkeit, für saubere, gratfreie Schnitte
- Kompatibel mit DeWalt, Skil, Metabo, Makita 12" Gehrungs-, Zug-Gehrungs-, Tischsägen und anderen Sägen
- Die FOXBC Aluminium-Sägeblattsägen-Serie ist ideal für kabelgebundene und kabellose Sägen, wenn NE-Metalle wie Aluminiumprofile, Kupferrohre, Messingplatten usw. auf der Baustelle geschnitten werden müssen.
Zahlung & Versand
CA PROP 65 WARNUNG
Let customers speak for us
Too early for an accurate assessment of the blades. Last set was not from you and they obviously didn’t wear well. Hopeful that these continue to impress me with their ability to maintain an effective edge.
I didn’t buy this, just testing review authenticity!
Wasn't to sure if it would fit but it worked out good will probably get more for cutting wood working putting on table top
I purchased the cutter head for my dewalt planer. I can’t say enough good about this product. This turned my planer in to a completely different machine. If you’re on the fence about the cost I am here to say it is well worth the money. Turned an hour long job into a 10 minut job. I put it off for a long time and now I regret not doing it sooner.
Wasn’t good booklet but YouTube was great. Once installed was the awesome bit it’s absolutely amazing so quiet and a wonderful finish on the results. Well worth it.
I was hesitant spending this amount without knowing if the reviews were true to their word. Fortunately my machining background in cutting tools helped make the decision to go ahead. No regrets! This tool exceeded my expectation. It cuts much quieter, cuts much smoother, less load on the machine allows for a deeper cut. This is a worth while tool.
Items arrived from China within the stated time with frequent shipping updates. Smooth transaction from ordering to delivery with no hidden costs. Very competitively priced. Had to trim width to fit the 20mm pulley wheel which wasn’t a problem and to be expected. Fitted tyre after soaking in hot water, clamping and using wooden dowel to ease the tyre on with some stretching. Plenty of advice online. Fits perfectly and does the job! Seems of good quality but time will tell and urethane should last. Very pleased with the product so far.
STAY AWAY FROM THIS COMPANY.
Here is a bit of the 9 emails so far. They keep asking questions, etc. etc. and even asking for me to take and send pictures of the blades side by side. They sent the wrong product and are refusing to make it right.
"Annie
Jan 20, 2025, 9:59 AM (5 days ago)
to me
please not worry, what are you old blades photo and received blades photo.
so i can help you"
I repled then I get:
"sorry about this matter again, what are your brand and model?
also what are you purchased them elsewhere.
please let me know link, so i can check what are error, this is ok?
thanks again"
ARE THEY SERIOUS? Pictures and a link from where I got the correct product? Then they go silent
My reply:
"Part of the email.."Here is a picture of the 2 blades side by side. They are not cut right, and you can see the difference and the holes do not line up. We have tried multiple times to make them work and they do not. It has also been 4 days since your last communication and 9 since I have requested the return."
Very very satisfied with this purchase! Talk about a game changer! Noise difference is unbelievable! Not to mention how well it cuts! Installation was pretty simple and straight forward. Fit perfectly and works even better!
It worked great! It cut straight and clean on a piece of 1 1/4" heavy DOM. Went nice a smooth with no heating of the part. For the money, this is a good deal.
If you need an everyday construction site set of blades, look no further than these. I cut approximately 30 brace blocks from 2x4s for a deck. One blade did 60 cuts like the first cut. I even did a one vertical cut on a 2x8 at the end. All were done on pressure treated lumber, I’m impressed. Can’t beat the price and I will be ordering more. 6/12 tpi for those who want to know.
These work like any other blade that I have purchased. I have not necessarily found any great difference between the most expensive brands and the lower priced brands since I tend to challenge the blade with all types of materials. I would lump this in the mix and buy these based upon the price. At a dollar and a half, for each blade, these are on the very affordable side of what is available. I have sometimes used long metal blades for demolition if I have a large amount of metal embedded (could be conduit, etc.).
I don't often review but I have gone through many planer blade sets for this planer. I'm very glad there is an exact fit replacement as it seems Dewalt has stopped selling blade replacements. These seem to be an exact fit. All dimensions are exact except they are consistently .02 grams heavier and there's no pyramid stamp. I only did the weight because I could not find discrepancies (LxWxHxT). I read a review that they are not as good as the original, don't last as long. May be slightly softer material, IDK...TBD. I will get back to you on this.For now I am giving it 5 stars. I'm on my 9th double pack of blades from Dewalt. That's 4 blade sets per double pack. 36 blade changes. Excellent planer. Glad FoxBC picked up this replacement part.Price = matchesFit = matchesLife & cut = TBDHope this helps, Cheers!
FOXBC 9 Inch 6/12 TPI Demolition Reciprocating Saw Blades for Nail-Embedded Wood, Bi-Metal, 25-Pack with Case --- Received 25 blades as advertised. Haven’t had occasion to use one yet but they are thinner metal, but solid and sharp. Demolition blades are usually bulkier than these. Fit easily into my Dewalt battery operated reciprocating. saw. Plastic case is adequate for keeping them together but doesn’t look like it would take much abuse.
Partial review only, as I need to put these through their paces. The blades are well formed and have no obvious flaws. No curves, errors, etc. The case could use a bit more strength, though, as both pieces of mine are cracked.
What customers think about the store
Store offers quality replacement blades and parts at competitive prices with international shipping. Customers praise product quality and fit, though delivery times from overseas can be lengthy (2-3 weeks). Excellent customer service and communication througho...
AI-generated from customer reviews.
This 12 Inch saw blade is being sold as an aluminum and other soft metal blade, however, I will be using it for woodworking, as well. I do occasionally work with aluminum and have relied on my regular carbide tipped saw blades. I see no reason to relegate this blade to solely be used for soft metals. In fact, the grind on this blade is recommended for MDF, particle board and other laminated wood products.I like the tooth-count, 96 teeth; in a miter saw that provides for a clean cut (use backup material behind the piece you are cutting). There is a slight negative rake on these teeth to prevent the blade from pulling on the material. In a miter saw the effect is to walk the blade towards you, so a negative hook is recommended. See the photo to get a view at the tooth leaning back slightly about 4 or 5 degrees. Note the brazing, I'm not sure about it (I'm not an expert), at least it is behind the edge of the teeth. Also note, the amount of carbide does not allow for many re-sharpenings. Should you bother to re-sharpen a blade at this price point...it'd cost as much to re-sharpen at 96 teeth!The TCG (triple chip grind or top center grind) on the teeth is perfect for nice, clean sided cuts. It produces a thin kerf at roughly 3/32nd of an inch, standard thin-kerf specification. See the photo for a close-up look at the flat ground tooth alternating with the bevel-ground tooth.I did notice the expansion slots lasered in were not very clean; holding the blade up to a light, I was not able to see a clear profile of the slot. This blade is quiet running, although it is being drowned by the sound of the miter saw's direct drive motor. Installed I did not note any wobble, so the plate is relatively flat.One cautionary note, this blade is rated at 5000 RPM, most miter saws are in the range of 3800-4800 RPM, within operating range. However, some miter saws operate as high as 5500 RPM, I'd be leary of use in such a miter saw. Initial cuts were clean and since it uses high-density carbide, I would expect it to remain sharp for some time. This is especially if used in wood only, maybe a little less long for use in soft metals.You can spend a lot more money on a 12" blade but in my opinion, this blade, with it's minor criticisms, is worth its price.
I bought this for my 12" Dewalt compound miter saw. This blade cuts aluminum like it was wood.
Granted, I'm not a sawblade aficionado so I can't give you great comparisons to other high-end blades. But to my amateur eye this blade looks great and cuts great. I was able to go through aluminum with no issues.
The 12-inch TCG 96-tooth industrial finish saw blade is a versatile and durable tool ideal for woodworking projects, providing outstanding performance on softwood, hardwood, and plywood surfaces. Its Triple Chip Grind (TCG) tooth geometry ensures long-lasting sharpness and reduces wear. The high 96-tooth count offers smooth, splinter-free cuts, even in thicker materials, while maintaining a fast cut rate at high RPMs. Made from carbide steel, this blade runs cool to prevent overheating and splintering, reducing vibration and noise for smoother operation. The 1-inch bore fits most radial arm, miter, and stationary table saws, making it highly compatible and versatile for DIY enthusiasts, contractors, finish carpenters, furniture makers, and cabinet professionals. Its design not only enhances cutting efficiency but also contributes to tool longevity and user safety, making it an indispensable addition to any workshop.
Never thought my life as a band dad for two music-loving teenagers would involve prop building, but here I am. Freshly recruited to the high school marching band's props committee, I'm facing the challenge of creating lightweight, portable climbing poles and ramps for the fall program. Budget is tight, and the materials need to be easy to handle. Enter the FOXBC 12-Inch Aluminum Saw Blade – a beacon of hope for this DIY novice.
I'm rather new to the whole power-tools DIY home renovations scene so I'm reviewing this blade as a weekend dabbler, not as a professional.
Research revealed that we needed a much finer-toothed saw blade for the basement PVC baseboards than the 40-tooth blade we've been using for the wooden baseboards. When I priced 80-tooth blades my jaw dropped! So you better believe I jumped on this sub-$40 96-tooth blade.
This FOXBC 12" blade does a beautiful job on the PVC. Clean, smooth cuts. No chipping. My skills passable; I appreciate the way this blade made me look like I know my way around a chop saw.
Up until this point, I'd just been using the 40-tooth Dewalt blade that came on my new miter saw. I was nervous about my first blade change because I'm not as strong as I used to be (60yo female). But one YouTube video later and I had my new blade up and running.
When I was installing this blade I was worried because I didn't think it had holes for the spindle lock. The spindle lock holes are very obvious on the Dewalt blade. I was hesitant to tighten the bolt and make the commitment with the FOXBC blade because I knew I'd never get it off again with the spindle lock. But I was wrong -- the holes are right there on the blade, in the right place. I'm not saying it'll be a piece of cake the next time I switch blades but any challenges I face will be due to arthritic hands, not the blade.
TL;DR - based on my experience cutting PVC molding & baseboard, this is a fantastic blade at a fantastic price. I'd definitely order it again.
Bonus points: blade doesn't come in that impossible-to-open stiff plastic packaging. Open the box, remove the blade guard, and go.
UPDATE: this blade worked great on my wood baseboards, too. I went slowly to avoid clogging the blade. The cuts are incredibly smooth; I got no splintering or burning.
Summary: Back in 2016, I bought a good amount of wood working tools, and my three primary circular saws are: Milwaukee Fuel 6-1/2", Dewalt 7491 10" job site table saw, and a Dewalt 12" chop saw. Over the years, I have bought many saw blades for them, and will be comparing the two FOXBC offerings (listed below) to those.