Description
FOXBC 9 Inch 6/12 TPI Demolition Reciprocating Saw Blades for Nail-Embedded Wood, Bi-Metal, 25-Pack with Case
- Recommended applications: Wood & Nails, Fiber Cement, Wood, Wood Composites, PVC, Rubber
- 9 Inch 6/12 TPI Specifically designed for maximum performance in nail-embedded wood applications.
- Bi-Metal M42 Material with 8% Cobalt saw blades for extreme demolition cuts
- Delivers the lowest amount of deflection while cutting wide materials
- Optimal for rough-in cutting a wide range of demolition materials on the construction site
- Compatible with Black & Decker, DeWalt, Makita, Milwaukee, Porter Cable, Ryobi, Bosch, SKIL
- FOXBC reciprocating saw blade keep your reciprocating saw, sawzall saw cutting cleanly for the best result.
- Package includes: 25pcs saw blades with storage case
Payment & Shipping
CA PROP 65 WARNING
Customer Reviews
If you need an everyday construction site set of blades, look no further than these. I cut approximately 30 brace blocks from 2x4s for a deck. One blade did 60 cuts like the first cut. I even did a one vertical cut on a 2x8 at the end. All were done on pressure treated lumber, I’m impressed. Can’t beat the price and I will be ordering more. 6/12 tpi for those who want to know.
These bladea are best used to rip things apart as due to the agressive ribbing on the blades they make fast but rough cuts. Perfect for demolition. The case they come in is really nice and is the perfect way to store them in your toolbox.
These FOXBC 9" demolition reciprocating saw blades work well for remodeling tasks.I've used these blades to cut out studs, sill plates, joists, nails, and water lines without much effort.
These blades did struggle when cutting through hardened construction screws, but then again almost every blade will have the same issue.
I tested these blades on my Milwaukee Sawzall and found them to be good value for money. These blades have a fast cut, aggressive tooth configuration. I tested them on 1.5” Baltic birch (same density as hardwood), cutting through construction grade outdoor screws. The blades barely slowed down while cutting through the #8 steel screws. As you can see from my photos, the cut edges were smooth with almost no tear out. The thin kerf on these blades makes them cut faster, especially in thicker woods, and improves performance. My one small disappointment with these blades, which was not enough to reduce my rating from 5 to 4, is that most of the coating was stripped from the blade down to bare metal on my first test cut. Since these are advertised as demolition blades, I can’t complain that they lose their finish so quickly and leave orange paint residue on the cut sides, but I’ve shown a Diablo bi-metal blade that’s been used at least a half dozen times for comparison.
This is my second set of recip saw blades from this manufacturer. The value is unbeatable. The blades are decent quality and you're simply not finding a set of 25 at this price anywhere from any of the name brands. The problem is that someone, I assume Amazon?...someone keeps shipping the orders in a flimsy paper packing pouch or plastic bubble-wrap mailer. Seems like just about everything else arrives in a sturdy cardboard box, but the one time a box would help they don't use one. The result is that the useful and attractive plastic storage box that holds the blades ends up smashed and unusable by the time the product reaches my door. Not only does this mean I now need to find another way to store the blades, it means there's a likelihood of getting bit by one when I open the envelope. I don't know whose fault this is but it needs to change. I'd have loved to have a handy storage case for the blades, and I'd have been delighted not to cut my finger on the saw teeth upon opening the package. Otherwise it's a great product that will find a ton of utility around the shop or yard.
Let customers speak for us
It worked great! It cut straight and clean on a piece of 1 1/4" heavy DOM. Went nice a smooth with no heating of the part. For the money, this is a good deal.
If you need an everyday construction site set of blades, look no further than these. I cut approximately 30 brace blocks from 2x4s for a deck. One blade did 60 cuts like the first cut. I even did a one vertical cut on a 2x8 at the end. All were done on pressure treated lumber, I’m impressed. Can’t beat the price and I will be ordering more. 6/12 tpi for those who want to know.
These work like any other blade that I have purchased. I have not necessarily found any great difference between the most expensive brands and the lower priced brands since I tend to challenge the blade with all types of materials. I would lump this in the mix and buy these based upon the price. At a dollar and a half, for each blade, these are on the very affordable side of what is available. I have sometimes used long metal blades for demolition if I have a large amount of metal embedded (could be conduit, etc.).
I don't often review but I have gone through many planer blade sets for this planer. I'm very glad there is an exact fit replacement as it seems Dewalt has stopped selling blade replacements. These seem to be an exact fit. All dimensions are exact except they are consistently .02 grams heavier and there's no pyramid stamp. I only did the weight because I could not find discrepancies (LxWxHxT). I read a review that they are not as good as the original, don't last as long. May be slightly softer material, IDK...TBD. I will get back to you on this.For now I am giving it 5 stars. I'm on my 9th double pack of blades from Dewalt. That's 4 blade sets per double pack. 36 blade changes. Excellent planer. Glad FoxBC picked up this replacement part.Price = matchesFit = matchesLife & cut = TBDHope this helps, Cheers!
FOXBC 9 Inch 6/12 TPI Demolition Reciprocating Saw Blades for Nail-Embedded Wood, Bi-Metal, 25-Pack with Case --- Received 25 blades as advertised. Haven’t had occasion to use one yet but they are thinner metal, but solid and sharp. Demolition blades are usually bulkier than these. Fit easily into my Dewalt battery operated reciprocating. saw. Plastic case is adequate for keeping them together but doesn’t look like it would take much abuse.
Partial review only, as I need to put these through their paces. The blades are well formed and have no obvious flaws. No curves, errors, etc. The case could use a bit more strength, though, as both pieces of mine are cracked.
I have an old craftsman jointer that desperately needed blades. I bought these and am super happy. Swapped the old ones out and the jointer is back to life. Blades were dharp and flat which is all that's necessary. I'll buy this brand again when I need another set!
Will get dull a little faster then their heated counterparts. However for the first time in 5 sets of blade I’ve just rotated these and did not see a single chip in the blades. This usually happens with any other blades I’ve tried including original DW735 13” blades.
Im going to use these from now on only, needs to be rotated just a little more often, but at the price point they are great. If you start questioning their performance then rotate/replace and go again with a fresh cut. 5 stars!
Customer image
These last almost as long as the expensive ones, they stay strait just as well, and cut very well. Even though the blade will dull slightly faster (i didn't really notice this until i measured the cuts and compared, it's not much), the amount of cut per dollar is higher than the expensive blades, and the amount of efficient cutting per dollar is higher too, since you are working with a fresher blade more of the time.To put it in perspective, the guys that were doing the demo work did not reach 6 inches further to get the expensive blades, they just grabbed these (they were both sitting on the supplies table). These guys hate changing blades and such, because they see it as wasted time, so for these to choose these much more economical blades tells me that I'll be buying these more often.One note, they come with an expandable blade case, but the plastic is "so-so", you probably won't be keeping the case and putting more blades in it like you would some similar cases that you buy separately, but at this price, the case is, essentially, a freebie with the blades, so it's much appreciated.
Quality. Good weight
there are more expensive, higher quality blades available, but this is still a great crosscutting blade and very much worth the money.
I got this for planning old rough Purple Heart after I destroyed the factory knifes ..I’ve excluded before and after photos with no sanding straight out of the planner
Nice container. Worth restoring with a bit of duct tape.I like to test these kinds of saw blades in a hand-powered handle and in a basic battery-powered saw. This gives me a pretty good idea of how well they perform without too easily overheating, which is murder on cutting edges.I'm not sure it shows very well in these pictures, but the kerf produced by hand cutting is wider than that produced with a power saw. I would have liked to see a bit wider kerf, which would have allowed the coating of these blades to last a bit longer than it does.The steel I cut was a medium hard framing steel, as was the deck screw, which is much harder than typical wood fasteners.I'd choose a bimetal blade with 8-tpi for wood demolition unless a lot of deck screws are involved. These blades are best suited for metal, as described.I was able to make a low angle plunge cut in wood and soft metal. For harder metals intended it be cut with this blade, a plunge cut can be started with a Dremel tool pretty easily.Recommended on price and general utility.
Works great
I make a lot of end grain cutting boards. Those things are really tough to level out after final glue up. I had been using a drum sander, but the heat generated and other factors just made it nearly impossible to get the boards flat. Now, I can use the planer. I make VERY light passes, but this thing cuts end grain!! And it puts a reasonable surface on the board so I am not having to sand out the horrible grooves from the drum sander. I start at 120 grit now. Saves me HOURS of work. Could not be more stoked on this cutter head.
What customers think about the store
The store offers high-quality and affordable replacement blades, knives, and accessories for woodworking tools. Customers praise the sharp cutting edges, precise fit, smooth operation, and long-lasting durability of the products. Many find them comparable or e...